Hardware update!
Hello!
I've updated the pcb-design,[1]
Now we have the revision 2.2!
Changes from rev 2.0 to rev 2.2 [2]
Add 100nF capacitor on the RESET line of the TPM for a better POR (Power On Reset) behavior..
Change pad 1 from octagon to square, for better identify pin 1.
Add tiny labels on every pin on the bottom side (without MISO/MOSI/CLK, no place for the labels on these pins)
I added a legend in the schematics, for better reference if you want to use the TPM on your own Hardware design.
Placement and the schematic you will find in the right column.
Bye for now
Paul
[1] two months ago
[2] Revision 2.1 was never produced.
I've updated the pcb-design,[1]
Now we have the revision 2.2!
Changes from rev 2.0 to rev 2.2 [2]
Add 100nF capacitor on the RESET line of the TPM for a better POR (Power On Reset) behavior..
Change pad 1 from octagon to square, for better identify pin 1.
Add tiny labels on every pin on the bottom side (without MISO/MOSI/CLK, no place for the labels on these pins)
I added a legend in the schematics, for better reference if you want to use the TPM on your own Hardware design.
Placement and the schematic you will find in the right column.
Bye for now
Paul
[1] two months ago
[2] Revision 2.1 was never produced.
Trackbacks
Keine Trackbacks
Die Kommentarfunktion wurde vom Besitzer dieses Blogs in diesem Eintrag deaktiviert.
Kommentare
Ansicht der Kommentare: Linear | Verschachtelt